压缩机扭矩传感器
动态测试量程:0-100Nm
精度:<0.1%FS
响应频率:>1KHz
定制周期:1个月

Test range: 0-100Nm
Accuracy: <0.1%FS
Response frequency: > 1KHz


•传感器安装在压缩机电磁离合器压盘上,适用于金属减振压盘和橡胶减振压盘
•传感器安装时,仅更换压盘,不拆卸带轮以及压缩机本体,不影响压缩机的正常工作
•压缩机安装状态下的功率消耗测试,结合制冷温度,可完成压缩机Map及效率测试,
•采用感应供电方式,不大幅增加带轮的惯性负载
 
•The sensor is mounted on the compressor electromagnetic clutch platen, suitable for metal and rubber damping platens
•When the sensor is installed, only the pressure plate is replaced, the pulley and the compressor body are not removed, and the normal operation of the compressor is not affected
•The power consumption test under the compressor installation state, combined with the refrigeration temperature, can complete the compressor map and efficiency test.
•Inductive power supply method, does not increase the inertial load of the pulley significantly